handyboard.com / cricket
home
about
documentation
program
bus
faq
download
get one
build
tech
links
discuss

BUILD

Intro Connectors Motor Touch Sensor Light Sensor Light Bulb Pinout

Light Bulb for Handy Cricket

Part Listing

The Cricket's motor outputs can power small light bulbs.

  • Light bulb. This should be rated for 4 to 6v and up to 100 mA. The one shown below has wires already attached.

  • One 2-position "DF3" plug for Cricket motor port.

  • Two wires with pre-crimped "DF3" connector.

  • Two pieces 1/16" heat shrink. This thinner heat shrink covers the splice between the bulb wire and the purple "DF3" wire.

  • One or two pieces 3/32" heat shrink. This heat shrink holds the pair of bulb wires together.

Assembly Diagram


Last modified: Sunday, 23-Jun-2002 11:21:54 PDT by fredm