Handy Board Software Resources
Utilities
Wintel
JBug11 by
John Beatty is a Windows 32-bit monitor/debugger for 68HC11
MCU's. From John's site: “Its development was inspired by the
difficulty of running PCbug11 on modern fast processors; and at the
same time provide some of the features expected in a modern GUI
environment, and one or two additional de-bugging tools.”
(Mon Mar 4 12:39:49 2002)
hbdl.exe,
a Windows 6811 Downloader for Windows 3.1 and Windows 95.
Created by Vadim Gerasimov of the MIT Media Laboratory expressly for
Handy Board users!
HBDL for XP. Copied from Griffin University.
dlm.exe,
Fred Martin's MS-DOS 6811 downloader that's configured for
use on Handy Boards with E1 versions of the 6811. Use the
“-256” command-line flag to make this program work with the A1
version of the 6811!
Motorola's AS11 assembler, a DOS-based
program for assembling 68HC11 source code into .s19 records that can
be downloaded into the Handy Board.
as11_ic for MS-DOS.
Compile ICB (Interactive C Binary driver) files on your MS-DOS
machine, using Kent Farnsworth's package of tools. The tools allow
you to assemble the pcode.s19 file (which runs on the Handy
Board's 6811) as well as compile ICB files. There is a readme file and a ZIP
archive. Note: This software requires a DOS Protected Mode
Interface (DPMI) driver. If you don't know what this is, just run the
software from within a DOS shell running under Windows, and you'll be
fine. (Wed Aug 20 22:18:30 1997)
Macintosh
Macintosh 6811 Downloader, MCL
version, Fred Martin's 6811 downloader application that works with
both 'A1 and 'E1 6811's. Version 1.1 (January 28, 1999) added
handshaking of bootstrap on main download, and Set Config option.
Version 1.2 (November 13, 1999), PPC only, adds compatibility with Mac OS 9.
The recommended downloader for PowerMac computers.
Version 1.1 for 68K Macs is
still available.
(Sat Nov 13 08:41:31 1999)
Macintosh 6811 Downloader, Fred Martin's
6811 downloader application that works with both 'A1 and 'E1
6811's. Now updated for System 8. (Sat Dec 6 12:15:13 1997)
as11_ic
for the Macintosh, ported by Dave Negro. Compile ICB
assembly language drivers for Interactive C on the Macintosh platform.
Does not support the #include directive, but otherwise is fully
capable.
sim6811 for the Macintosh version 1.4, by
Tomaso Paoletti. A
powerful 6811 simulator application, including partial interrupt and
serial port simulation. View the readme file, or download application with sources.
(link updated Wed Aug 1 06:57:20 2001)
xasmhc11, a
freely-distributable Mac version of Motorola's 68HC11 cross-assembler.
Written waaaay back in 1990, but it still works great—even on Mac
OS 8.5.
Agnostic
config0c.s19, a tiny .s19 file for
reprogramming the 6811's CONFIG register to the value 0x0c, which is
the proper value for use with the Handy Board. Factory-fresh 6811s
have their CONFIG registers set incorrectly, and after a bad hardware
crash sometimes the register will reset to an improper value.
Download this file using any downloader, making sure to put the downloader in the mode for programming EEPROM, not RAM. The first time you download this file, you will get a memory error, indicating the CONFIG register was incorrect. Download the file again, and the error message should not recur, indicating the CONFIG register has been correctly programmed.